We're going to show you how to install you’re warp 9 light switch on your surron
First all you will need a 5mm Allen wrench.
Start by deciding where you want to mount your light switch on your handle bars, make sure its easy to find while riding so you don’t crash trying to find it, also make sure to give the wire plenty of space and not to shove it up against something to keep the wire from getting ruined,
Once you’ve found a good spot, bolt the bracket on the back with the two bolts
You can also bolt the light switch onto your brake lever mount by replacing the front mount with the light switch and provided bolts.
Next remove the two bolts on your ignition cover and pull your cover out
Find and Gently pull up the wiring harness,
Feed your switch cable through to your wire harness
Than find the plug with the wire colors black and blue
Unplug this and than plug in your light switch to the matching connectors
Gently put your wires back inside
Put your ignition back on and re tighten the three bolts
Turn your bike on and make sure the light switch is working properly
Your warp 9 light switch is now installed and you’re ready to ride!
Check out the Warp 9 Light Switch Here: https://www.stoked-electric.com/product-page/surron-light-button-warp-9
Stoked Electric is not responsible for any improper installation, or any damage to you, your bike, or the products.
Comentários