Hey what’s up everyone were going to show you how to install you’re warp 9 Rear Suspension Triangle on your Surron
First the tools you will need are
13mm Socket & Ratchet
6mm allen wrench
And a motorcycle stand
The rear suspension triangle is a great way to upgrade the performance of your bike and give you piece of mind with more durability especially when jumping or off roading.
To begin start by unbolting the bolt that is connecting the rear suspension triangle to the rear suspension linkage
Once you remove this bolt the rear of the bike will drop down
Next remove the 3 bolts holding you rear suspension linkage and remove the linkage
Now remove the two bolts holding your triangle.
Once your triangle is unbolted from the frame, lift up the suspension and slide your triangle out.
Your warp 9 triangle kit will come with new bolt and bushing hardware you will want to use instead of the OEM bolts
Now slide your new warp 9 triangle back in thought the rear shock.
Before installing any of the new bolts add a few drops of thread lock onto the new bolts
Install the two bolts connecting the triangle back to the frame
(Now add your new warp 9 linkage)
Start by bolting the linkage back on to the bottom of the shock
Next You’ll start bolting your link bolts back on, starting from the bottom and work your way to the top,
so start with the bottom shock bolt, than to the swing arm, and next to the rear suspension triangle.
The bolt from your linkage to your triangle will require to bring your rear end back up so make sure to prop it up or get help if needed
Next reinsert the bolt to attach your triangle and linkage and tighten
Your Warp 9 Triangle is now installed and ready to go!
Make sure to check us out at www.stoked- electric.com for all your E-Moto Needs.
Well see you on the trails!
Comments